control-ikea-lightbulb

This skill provides a lightweight Python script to control a local smart bulb (supports TP-Link Kasa-compatible bulbs via python-kasa). It is intended for local LAN devices that do not require cloud credentials; control is by IP address.

When to use this skill

• When you want to turn a bulb on or off
• When you want to set brightness (0-100)
• When you want to set color (HSV)
• When you have the bulb's local IP and it's accessible from this machine

Contents

• scripts/control_kasa_light.py — main runnable script (Python 3.9+)
• scripts/light_show.py — small light-show controller for sequences (uses python-kasa). Changes include:

- Default white uses a high color temperature (9000K) to make white appear "whiter"; pass --white-temp to override.

- Bug fixes: the off-flash between blue→red now ignores transitions to white (saturation==0) to avoid white<->blue ping-pong, and white-temp is only applied to white steps (fixes red being skipped during off-flash). White steps also set brightness even without --double-write.

• scripts/run_test_light_show.sh — helper to run light_show via uv

Notes

• This repo is set up for uv (no manual environment activation). Dependencies live in pyproject.toml and wrappers prefer uv run.

Example:

uv run --project ./skills/control-ikea-lightbulb python ./skills/control-ikea-lightbulb/scripts/control_kasa_light.py --ip 192.168.4.69 --on --hsv 0 100 80 --brightness 80

• Install uv:

- brew install uv (macOS)

- pipx install uv (cross-platform)

• The provided wrapper script requires uv:

./skills/control-ikea-lightbulb/scripts/run_control_kasa.sh --ip 192.168.4.69 --on --hsv 0 100 80 --brightness 80

• The test helper also prefers uv:

./skills/control-ikea-lightbulb/scripts/run_test_light_show.sh --ip 192.168.4.69 --duration 6 --transition 1 --off-flash --verbose

• If your device is actually an IKEA TRADFRI device (not Kasa), this script is a starting point; tell me and I will add TRADFRI support.
• No cloud credentials are required; control happens over LAN to the device's IP.

Quick start

1. Install uv (macOS):

brew install uv

1. Turn the bulb on (replace the IP):

./skills/control-ikea-lightbulb/scripts/run_control_kasa.sh --ip 192.168.4.69 --on

1. Set color and brightness:

./skills/control-ikea-lightbulb/scripts/run_control_kasa.sh --ip 192.168.4.69 --hsv 0 100 80 --brightness 80

Git note

• No local environment artifacts are tracked; use uv.

Note about Python requirements and recent change

• The skill previously declared python-kasa>=0.13.0 which caused dependency resolution failures on this machine. To make the skill runnable locally the project's pyproject.toml was adjusted to:

- requires-python = ">=3.11, <4.0"

- python-kasa>=0.10.2

• This allows the resolver to pick a compatible python-kasa on machines with Python 3.11+. If you prefer a different constraint (or want me to revert this change), tell me and I will update the pyproject.toml and README accordingly.